Rifle Scope
 |
US $204.95
Is there any way of repairing my rifle scope?
My rifle is shooting too high and I already have the scope on the lowest setting. Please help. Is there any way of fixing thye ploblem on my own?
first make sure the scope mounts are matched as a set
then check to see that they are mounted properly to the base
also check that the scope base is properly mounted and is the correct type for your gun
if all is good cut up an aluminum can and try shimming the scope inside the rings
cans typically are .005 thick
you may use up to 2 pieces
cut the aluminum to fit exactly to the size of the rings and shim the bottom half of the ring where the scope sits in it
while you have the scope off check carefully to assure that the scope tube is not bent
this happens when people dont set the scope in the rings and over tighten the screws
The OMG-AR15 Unicorn zombie gun (Boing Boing)
Marque Cornblatt made the OMG-AR15 Unicorn zombie gun using Smith & Wesson
parts and an 18v pole saw. "It's very accurate," he says. Below, a video of it
in use. Inspired by the recent trend towards rifle-mounted chainsaws, we at
Guns & Gardens wanted to give the idea a try -- our way. First, we [...]
Set up Your Scope for Success - Rifle Shooting Technique - NSSF Shooting Sportscast
You can follow any responses to this entry through the RSS 2.0 feed. Both comments and pings are currently closed.
Comments are closed.